This is a custom servo that we built for a new application. In this case, we designed the system here, but we will be happy to work with your designs, too. It is not as expensive as you might think, due to modern CAD and manufacturing processes.

We can also duplicate old, obsolete PC boards if you have a need to do so.

Sometimes you just need an amplifier for a photomultiplier tube that has a 1012 input impedance, supply indications, and a handy little bargraph to show your output at a glance.....and it has to fit in the case you already have.

We'll package it up, program, and install it.This is a controller for a coil winding machine. It was built, installed, and tested for $20,000 less than the next lowest quote. To be clear, our company does not "work cheap". What we do, though, is install what it takes to control your machine without frills you don't need, and wierd, hard-to-get parts you don't want.

The customer had some older machines that had defective or missing control boards. We took one of the old ones and made him an improved replacement. This saved the customer somewhere in the neighborhood of $35,000.00.